AUTONET TV

Plugging Away (Spark Plug Replacement)

If you drive a vehicle with a gasoline engine, thank the spark plugs for igniting the gasoline/air mixture in each cylinder that keeps your vehicle traveling smoothly down the road every day.  Your spark plugs work hard, firing thousands of times in a well-choreographed order, and you usually don't pay much attention to them until one of them stops working the way it should.

Signs that spark plugs are wearing out include:

• Engine runs more roughly than it did
• Vehicle doesn't start as easily as it used to
• Vehicle hesitates when you press on the accelerator
• Your fuel economy has gotten worse

When a spark plug stops working altogether, you will find your engine has likely lost a lot of its power and isn't running smoothly.  Your Check Engine light may  come on.  Then it's time to head to come to our service center to have it diagnosed.

If your plugs need to be replaced, they're usually done all at the same time. And if your vehicle has spark plug wires, experts recommend you change them as well. Different type of spark plugs last longer than others, and your service advisor can discuss what's best for your vehicle and driving habits.

A technician will also determine if there are any carbon deposits on your plugs, how healthy the ignition coil is (it's the part that supplies the high-voltage jolt that makes the spark) and will look for other signs and symptoms that may point to other problems in your engine. For instance, if a spark plug is fouled by oily deposits, it's possible oil is getting into the combustion chamber. 

They will also check all the plugs to see if there are problems in just one or all cylinders.  Sometimes a technician will find a plug that has overheated, literally melting the metal.  In that case, they may recommend they correct that problem before replacing the spark plugs.

Most spark plugs will last for a good, long time.  Even if you aren't seeing any symptoms they're wearing out, make sure you have your service advisor check your vehicle manufacturer's recommended maintenance intervals.  Preventative maintenance will keep your vehicle running reliably so you can count on it to get you where you want to go. 

Darrell's Firestone
23534 Farmington Rd
Farmington, MI 48336
248-477-9090
http://www.darrellsfirestone.net

Out of Joint (CV Joint and Boot Replacement)

If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for “constant velocity.” In essence, it’s a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels.  When you turn the wheels, no matter what angle, the input velocity rotation will be equal to the output. Thus, the name, CV (constant velocity) joint. Other vehicles with 4-wheel drive and all-wheel drive also use CV joints.  

If one of your CV joints isn’t working right, you may find your vehicle difficult to handle.  If one breaks, your vehicle may stop moving.  So, it’s important that CV joints be in top working condition.  The joints need a lot of lubrication, so they are surrounded by grease.  There’s a rubber enclosure around them called the boot which holds the grease in and protects CV joints from the elements. 
 
The biggest problems come when one of those rubber boots cracks.  Water and dirt can then get into the joint, causing it to wear down and lose all its vital lubrication.  It’s important to have your CV joints inspected regularly so a technician can spot cracks before the CV joints are ruined.  Sometimes just the boot can be replaced before any major damage is done.  But when the joint does go bad, it must be replaced.  

Signs your CV joint needs changing out? You might hear a clicking sound when you turn if the CV joint is worn out. You might notice some thick, black grease around your wheel or on the pavement where you park your vehicle.  You might also feel your vehicle vibrate when you’re going fast.

If you suspect you might have a bad CV joint, bring your vehicle in so a technician can determine what’s going on.  Keep your CV joints in good shape and reduce the risk of them seizing up at an inopportune time so you can avoid being stranded.

Darrell's Firestone
23534 Farmington Rd
Farmington, MI 48336
248-477-9090
http://www.darrellsfirestone.net

Poor Reflections (Door Mirror Problems)

Mirror, mirror on the door, why is my vision there so poor? Well, you could have a broken outside rearview mirror that's disabled your blind spot vision there and endangering your ability to see some of the traffic around you. 

Outside rearview (or door) mirrors are important safety devices that are thoughtfully designed to help drivers see.  And there are a variety of ways those door mirrors can develop problems.

One is when the glass is broken in them.  Sometimes it's caused by an accident or vandalism.  But without your ability to see in that mirror, you could be driving blind, unable to see drivers approaching from the rear in adjacent lanes.  Sometimes it's as simple as having the glass replaced.  You'll greatly enhance your safety if you do.

Then there's the door mirror that you can't adjust.  First, let's look at a common scenario in later models, the power mirror.  They're great when they're working, awful when they're not.  Sometimes the motor fails, the switch goes bad or the wiring fails to deliver power.

Or how about the manually-adjusted door mirror that has either frozen up or just flops around? In this case, the mechanism has corroded, jammed up or a part has broken.  In both power- and manually-adjusted door mirrors, it sometimes can be hard to keep them in the right position.  Plus, every time there's a driver change, it may be hard to adjust those broken mechanisms by hand.

Finally, heated door mirrors can be extraordinarily useful in eliminating fogging or icing up in certain weather conditions.  But those heating elements can fail, switches can break or wiring can go bad.  Suddenly your fogged over, frozen mirrors aren't doing you any good at all. 

Good drivers use those outside rearview mirrors all the time.  They should be working the way designers intended, to provide the driver with vital traffic position information.  That's the kind of safety device you should get fixed or replaced sooner rather than later.  It's well worth it if you prevent even one little accident. 

Darrell's Firestone
23534 Farmington Rd
Farmington, MI 48336
248-477-9090
http://www.darrellsfirestone.net

See the Light (Automatic High Beam Dimmers)

It's happened to all of us.  We're driving down a highway at night and over a crest appears a car with its high beams blazing.  You are momentarily blinded, hoping the other driver will switch them to their low beam setting and restore your vision.

Not only do we not appreciate being blinded, face it; we don’t want to be that other driver, either.  You know, the one who forgets to turn down their high beams.

Why do we want high beams in the first place? They can improve safety when used correctly, giving drivers more reaction time since they can see farther down the road.  But research has found many drivers either don't use them or, when they do, they frequently forget to switch to low beams.  Enter the automatic high-beam dimmer.

The quest for the perfect one began back in the 1950s, General Motors invented something it called the "Autronic Eye." It was a phototube which sat on the dashboard and turned down your beams when it saw other headlights.  While touted as being the biggest advance in night driving safety in 30 years, it didn't work all that well.  But as technology got more advanced, systems improved.

Today's automatic high beam dimmers usually have a camera in the rear view mirror (pointing forward).  When the camera sees lights, software in the system's computer attempts to determine the source of the light, whether it is an oncoming vehicle, taillights, ambient city lights, street lights or the reflection off of a street sign.  It then adjusts the headlights to operate high beams if appropriate or a less-blinding mode if they’re not.

Some automakers are striving to make their headlight systems smarter and safer by developing lamps that can avoid blinding oncoming drivers by means other than simply dimming them. One idea? Splitting the beams so they will block just the portion that shines into the eyes of oncoming drivers.

It's a long way from the Autronic Eye. 

Darrell's Firestone
23534 Farmington Rd
Farmington, MI 48336
248-477-9090
http://www.darrellsfirestone.net